System Sensor’s AV notification devices are the most versatile, easy to install, and cohesive line of audible visible (AV) notification appliances in the industry. System Sensor greatly simplifies the specification, configuration, and installation of your notification project by providing a plug-in design, aesthetic and functional consistency, and field-adjustable settings across the entire line. Whether for fire alarm systems, emergency communications systems, mass notification systems, general signaling, directional sound, or voice evacuation systems, System Sensor enables you to save time and money while meeting the widest range of notification codes and requirements. Look for the L-Series products in the following subcategories: Accessories, Chimes, Chime Strobes, ECS and MNS, Horns, Horn Strobes, Speakers, Speaker Strobes, and Strobes.
AV Notification – Interior Devices
CHIMES and STROBES
Chimes
System Sensor Chimes are designed to produce a distinctive chime tone to meet UL 464 private mode applications for alerting trained personnel to investigate possible emergency situations and take appropriate actions. Devices feature rotary switches to select from a multitude of sound patterns and volume settings, and are compatible with 12- or 24-volt systems for additional customization. Using the shorting spring feature to provide instant feedback to ensure that wiring is properly connected – in conjunction with our plug-in design – simplifies the process and cuts install time. Chimes are also compatible with the System Sensor synchronization protocol.
Chime Strobes
System Sensor indoor Chime Strobes were designed to produce a distinctive chime tone to meet UL 464 and UL 1638 in private mode applications, when alerting trained personnel to investigate possible emergency situations and take appropriate actions. Using the shorting spring feature to provide instant feedback to ensure that wiring is properly connected – in conjunction with our plug-in design – simplifies the process and cuts install time. The L-Series offers 7 field-selectable candela settings for wall and ceiling models and 12-or 24-volt operation in one device, chime strobes maximize profits and provide a high level of customization.
Horns
System Sensor Horns increase application flexibility for indoor or outdoor installations. Intended for full building notification as well as on the property ground, they produce a loud sound to notify occupants to evacuate the buildings. Installers can easily adapt devices to suit a wide range of application requirements by using field-selectable sound patterns and volume settings. Compatible with 12- or 24-volt systems. The universal mounting plate’s plug-in design simplifies installation, too. System Sensor horns are listed to UL 464 for public mode application.
Horn Strobes
System Sensor Horn Strobes are rich with features guaranteed to cut installation time and maximize profits. Intended for full building notification as well as on the property ground, they produce a loud sound to notify occupants to evacuate the buildings; the strobe is intended to notify those that may have a hearing impairment. Features include a universal mounting plate with a preliminary snap-in feature to hold the product in place for the screw attachment, 7 field-selectable candela settings for wall and ceiling mount devices, and rotary switches to select horn tone and volume settings. Compatible with 12- or 24-volt systems. Horn Strobes are listed to UL 1971 and UL 464 for public mode evacuation.
L-Series Low Frequency Wall Sounder Strobe
L-Series line of wall horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the backbox, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.
To further simplify installation and protect devices from construction damage, the L-Series utilizes a universal mounting plate for all models with an onboard shorting spring, so installers can test wiring continuity before the device is installed. Installers can also easily adapt devices to suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12 or 24V operation, and a rotary switch for horn tones with two volume selections.
Features & Benefits:
- Updated modern aesthetics
- Small (Compact) profile devices for Horns and Horn Strobes
- Plug-in design with minimal intrusion into the backbox
- Tamper-resistant construction
- Automatic selection of 12- or 24-volt operation at 15 and 30 candela
- Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135, and 185.
- Horn rated at 88+ dBA at 16 volts
- Rotary switch for horn tone and two volume selections
- Mounting plate for all standard and all compact wall units
- Mounting plate shorting spring checks wiring continuity before device installation
- Electrically compatible with legacy SpectrAlert and SpectrAlert Advance devices
- Compatible with MDL3 sync module
Certifications:
- UL Listed: S4011- S5512
- ULC Listed: S4011- S5512
- FM Approved
- CSFM: 7125-1653:0504- 7135-1653:0503
L-Series 4-Wire Wall Horn Strobe - Combination Strobe
The entire L-Series product line of 4-Wire horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature a plug-in design with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.
To further simplify installation, the L-Series utilizes a universal mounting plate so installers can mount them to a wide array of back boxes. With an onboard shorting spring, installers can test wiring continuity before the device is installed.Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with two volume selections
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Automatic selection of 12- or 24-volt operationat 15 and 30 candela
- Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135
- Horn rated at 88+ dBA at 16 volts
- Rotary switch for horn tone and two volume selections
- Universal mounting plate for ceiling units
- Mounting plate shorting spring feature checks wiring continuity before device installation
- Electrically Compatible with legacy SpectrAlert® and SpectrAlert® Advance devices
- Listed for wall mounting only
- Compatible with MDL3 sync module
Certifications:
- UL Listed: S4011; S5512
- FM Approved
- CSFM: 7125-1653:0504; 7135-1653:0503
L-Series Low Frequency Wall Sounder Strobe - Combination Strobe
The L-Series offers the most versatile and easy-to-use line of low frequency sounder strobes in the industry. With white and red plastic housings, listed for wall mounting, L-Series Low Frequency can meet virtually any application requirement. The low frequency sounder strobes were designed to address the NFPA 72 sleeping space requirements that require a low frequency notification appliance that operates within frequency range of 520 Hz ± 10% and is of a square wave tone. Like the entire L-Series product line they include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.To further simplify installation and protect devices from construction damage, L-Series uses a universal mounting plate with an onboard shorting spring, so installers can test wiring continuity before the device is installed.
Features & Benefits:
- 520 Hz ± 10% square wave tone, NFPA compliance
- Full candela range plus high/low tone options to optimize current draw for a wide variety of applications
- Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135, and 185.
- Rotary switch for High/Low, Temp3, Temp4, and Continuous settings
- Plug-in design with minimal intrusion into the back box
- Mounting plate shorting spring checks wiring continuity before device installation
- Electrically compatible with legacy SpectrAlert and SpectrAlert Advance devices (Direct replacement for HW/R-LF and P2R/WH-LF)
- Compatible with MDL3 sync module
- Round Sounder Strobes listed for ceiling and wall
- Updated modern aesthetics
Certifications:
- UL Listed: S4011
- FM Approved: PR452768
- CSFM: 7125-1653:0517
L-Series Wall Speaker Strobe - Combination Strobe
The L-Series offers the most versatile and easy-to-use line of low frequency sounder strobes in the industry. With white and red plastic housings, listed for wall mounting, L-Series Low Frequency can meet virtually any application requirement.
The low frequency sounder strobes were designed to address the NFPA 72 sleeping space requirements that require a low frequency notification appliance that operates within frequency range of 520 Hz ± 10% and is of a square wave tone. Like the entire L-Series product line they include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.To further simplify installation and protect devices from construction damage, L-Series uses a universal mounting plate with an onboard shorting spring, so installers can test wiring continuity before the device is installed.
Features & Benefits:
- Plug-in design and protective cover reduce ground faults
- Universal mounting plate with an onboard shorting spring tests wiring continuity before installation
- No extension ring required
- Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135 and 185
- Automatic selection of 12 or 24V operation at 15 and 30 candela
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7Vrms) and power settings (1/4, 1/2, 1, and 2W)
- Speakers offer high fidelity and high-volume sound output
- 520 Hz +/- 10% square wave tone capable with compatible fire alarm control panel (FACP)
- Tamper-resistant construction
- Updated modern aesthetics
Certifications:
- UL Listed: S4048
- ULC Listed: S4048
- FM Approved
- CSFM: 7320-1653:0505
L-Series 4-Wire Ceiling Horn Strobe - Combination Strobe
The entire L-Series product line of 4-Wire horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature a plug-in design with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.
To further simplify installation, the L-Series utilizes a universal mounting plate so installers can mount them to a wide array of back boxes. With an onboard shorting spring, installers can test wiring continuity before the device is installed.Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with two volume selections
Features & Benefits:
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Automatic selection of 12- or 24-volt operationat 15 and 30 candela
- Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135
- Horn rated at 88+ dBA at 16 volts
- Rotary switch for horn tone and two volume selections
- Universal mounting plate for ceiling units
- Mounting plate shorting spring feature checks wiring continuity before device installation
- Electrically Compatible with legacy SpectrAlert® and SpectrAlert® Advance devices
- Listed for wall mounting only
- Compatible with MDL3 sync module
Certifications:
- UL Listed: S4011; S5512
- FM Approved
- CSFM: 7125-1653:0504; 7135-1653:0503
L-Series Ceiling Chime Strobe - Combination Strobe
L-Series chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action. Security guard and nurse workstations are ideal locations for these chimes and chime strobes.
All devices feature plug-in design with minimal intrusion into the backbox, making the installation fast and foolproof while virtually eliminating costly and time-consuming ground faults. Installers can easily adapt devices to a wide range of application requirements using field-selectable candela settings, automatic selection of 12 or 24V operation, and a rotary switch for chime tones and two volume selections.
Features & Benefits:
- Updated modern aesthetics
- Plug-in design with minimal intrusion into the backbox
- Mounting plate shorting spring feature checks wiring continuity before device installation
- Captive mounting screw
- Tamper-resistant construction
- Field-selectable candela settings for ceiling-mount devices: 15, 30, 75, 95, 115, 150, 177
- Automatic selection of 12 or 24V operation at 15 and 30 candela
- Rotary switch for tone and volume selections
- Five selectable tones with high and low volume settings
- Electrically compatible with legacy SpectrAlert and SpectrAlert
Certifications:
- UL Listed: S4011
- ULC Listed: S4011
- FM Approved: 3057383; 3057072
- CSFM: 7135-1653:0503
L-Series Ceiling Speaker Strobe - Combination Strobe
L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers. In addition, a protective plastic cover prevents nicked wires by covering exposed speaker components.
These devices also enable faster installations by providing instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and seven field-selectable candela settings for ceiling speaker strobes. The low total harmonic distortion of the speakers offer high fidelity sound while still offering high-volume sound for use in high ambient noise applications.
Features & Benefits:
- Plug-in design and protective cover reduce ground faults
- Universal mounting plate with an onboard shorting spring tests wiring continuity before installation
- No extension ring required
- Field-selectable candela settings for ceiling units: 15,30, 75, 95, 115, 150 and 177
- Automatic selection of 12 or 24V operation at 15 and 30 candela
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7Vrms) and power settings (1/4, 1/2, 1, and 2W)
- Speakers offer high fidelity and high-volume sound output
- 520 Hz +/- 10% square wave tone capable with compatible fire alarm control panel (FACP)
- Tamper-resistant construction
- Updated modern aesthetics
Certifications:
- UL Listed: S4048
- ULC Listed: S4048
- FM Approved
- CSFM: 7320-1653:0505
L-Series Ceiling Chime Strobe - Combination Strobe
The L-Series offers the most versatile and easy-to-use line of low frequency sounder strobes in the industry. With white and red plastic housings, listed for wall mounting, L-Series Low Frequency can meet virtually any application requirement. The low frequency sounder strobes were designed to address the NFPA 72 sleeping space requirements that require a low frequency notification appliance that operates within frequency range of 520 Hz ± 10% and is of a square wave tone. Like the entire L-Series product line they include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.To further simplify installation and protect devices from construction damage, L-Series uses a universal mounting plate with an onboard shorting spring, so installers can test wiring continuity before the device is installed.
Features & Benefits:
- 520 Hz ± 10% square wave tone, NFPA compliance
- Full candela range plus high/low tone options to optimize current draw for a wide variety of applications
- Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135, and 185.
- Rotary switch for High/Low, Temp3, Temp4, and Continuous settings
- Plug-in design with minimal intrusion into the back box
- Mounting plate shorting spring checks wiring continuity before device installation
- Electrically compatible with legacy SpectrAlert and SpectrAlert Advance devices (Direct replacement for HW/R-LF and P2R/WH-LF)
- Compatible with MDL3 sync module
- Round Sounder Strobes listed for ceiling and wall
- Updated modern aesthetics
Certifications:
- UL Listed: S4011
- FM Approved: PR452768
- CSFM: 7125-1653:0517
AV Notification – Exterior Devices
SpectrAlert® Advance horn strobes include a variety of features that increase application flexibility
- SPSCWHK-P SpectrAlert, Ceiling Mount
- SpectrAlert® Advance Weatherproof 2-Wire
- SpectrAlert® Advance Weatherproof 4-Wire
- SpectrAlert® Advance Weatherproof WSS
- System Sensor SPRK SpectrAlert
- System Sensor SPSWK-P SpectrAlert Advance
- System Sensor HRK-R SpectrAlert Advance
- System Sensor SPSCWK-CLR-ALERT SpectrAlert
System Sensor SPSCWHK-P SpectrAlert SpeakerStrobe, Ceiling Mount, High cd, NO Marking, White
The SpectrAlert Advance series of notification appliances offers a wide range of speaker/strobe products for wall and ceiling applications, indoors and outdoors. The strobe portion is designed to be used in 12 or 24 volt, DC or FWR (full wave rectified) systems. The speaker portion can be operated with distribution amplifiers having an output voltage of either 25 or 70.7 volts.
General Information
SpectrAlert® Advance Weatherproof 2-Wire Wall Horn Strobe - Combination Strobe
The SpectrAlert Advance series of notification appliances offers a wide range of horns, strobes, and horn/strobes, for wall and ceiling applications, indoors and outdoors. They are designed to be used in 12 or 24 volt, DC or FWR (full wave rectified) systems. These products are electrically backward compatible with the previous generation of SpectrAlert notification appliances. Horn/ strobe products are available in two versions. The 2-wire products fit systems where a single NAC controls both horn and strobe. The 4-wire products are intended for systems which have separate wiring circuits for the horn and strobe. All SpectrAlert Advance products are suitable for use in synchronized systems. The System Sensor MDL module may be used to provide synchronization.
Features & Benefits:
- Weatherproof per NEMA 4X, IP56 Listed to UL 1638 (strobe) and UL 464 (horn)
- Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
- Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Rotary switch for horn tone and three volume selections
- Horn rated at 88+ dBA at 16 volts
- Rated from –40°F to 151°F
- Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Listed for wall mounting
SpectrAlert® Advance Weatherproof 4-Wire Horn Strobe - Combination Strobe
SpectrAlert® Advance 4-wire horn strobes are designed to simplify your installations, with features such as plug-in designs, instant feedback messages to ensure correct installation of individual devices, and11 field-selectable candela settings for wall and ceiling strobes and horn/strobes.Features & Benefits:
- Same mounting plate for wall- and ceiling mount units
- Shorting spring on mounting plate for continuity check before installation
- Captive mounting screw
- Tamper-resistance capability
- Field-selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
- Automatic selection of 12 or 24V operation at 15 and 15/75 candela
- Rated from –40 and 151 °F (–40 and 66 °C).
- Rain-proof per UL50 (NEMA 3R) and weatherproof per NEMA 4X, IP56
- Minimal intrusion into the backbox
- Horn rated at 88+ dBA at 16V
Certifications:
- UL Listed: S4011
- ULC Listed: S4011
- FM Approved
- MEA: 452-05-E
- CSFM: 7300-1653:0188
SpectrAlert® Advance Weatherproof Wall Speaker Strobe - Combination Strobe
SpectrAlert® Advance speaker strobes can be used outdoors, in wet or dry applications, and provide reliable operation from −40 to 151 °F. They provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate and intelligible broadcast of evacuation messages.
These speaker strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, speaker voltage and power settings, and automatic selection of 12 or 24V operation enable installers to easily adapt devices to meet requirements.
Features & Benefits:
-
- Weatherproof per NEMA 4X, IP56
- Rated from –40 to 151 °F
- Plug-in design reduces ground faults
- Universal mounting plate with onboard shorting spring that tests wiring continuity before devices are installed
- Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115- high candela models have settings: 135, 150, 177, and 185
- Automatic selection of 12 or 24V operation at 15 and 15/75 candela
- Rotary switch for speaker voltage (25 and 70.7Vrms) and power settings (1/4, 1/2, 1, and 2W)
- Tamper-resistant construction
Certifications:
- UL Listed: 75S0
- MEA Approved: 10-08-E
- CSFM: 7320-1653:201
System Sensor SPRK SpectrAlert Advance Outdoor Speakers, Wall Mount, "FIRE" Marking, Red
The SpectrAlert Advance series of notification appliances offers a wide range of indoor and outdoor speakers for wall and ceiling applications, indoors and outdoors. They are designed to be used at either 25 or 70.7 volts, and operate at any one for four input power levels.
These products are electrically backward compatible with the previous generation of SpectrAlert speakers. With its low total harmonic distortion, the SpectrAlert Advance SP series offers high fidelity sound output. The SpectrAlert Advance SPV series offers greater sound output at every tap setting for applications with high ambient noise levels.
Main Features
- Includes plastic weatherproof back box
- Color Red
- Dimensions with Back Box 6.0″ L x 5.0″ W x 2.8″ D
- ECS/MNS Device Type Speakers
- Frequency Range400 to 4000 Hz
- Location Outdoor
- Mounting Wall
- Operating Temperature-40°F to 151°F (-40°C to 66°C)
- Outdoor Device Type Speakers
- Power ¼, ½, 1, 2 watts
- Series SpectrAlert Advance
- Voltage 25 Volts or 70.7 Volts (nominal)
- Wiring Gauge 12-18 AWG
System Sensor SPSWK-P SpectrAlert Advance Plain Wall Speaker Strobe Standard cd, White, Clear Lens, Outdoor
The SpectrAlert Advance series of notification appliances offers a wide range of speaker/strobe products for wall and ceiling applications, indoors and outdoors. The strobe portion is designed to be used in 12 or 24 volt, DC or FWR (full wave rectified) systems. The speaker portion can be operated with distribution amplifiers having an output voltage of either 25 or 70.7 volts.
Name: System Sensor SPSWK-P SpectrAlert Advance Plain Wall Speaker Strobe Standard cd, White, Clear Lens, Outdoor, Honeywell International, Inc, System Sensor
System Sensor HRK-R SpectrAlert Advance Outdoor 12/24V Horn for Ceiling or Wall
SpectrAlert Advance series offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white and red plastic housings, wall and ceiling mounting options, and plain and FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement. SpectrAlert Advance outdoor horns, strobes, and horn strobes can be used indoors or outdoors in wet or dry applications, and can provide reliable operation from -40°F to 151°F.
- Weatherproof per NEMA 4X, IP56
- Listed to UL 1638 (strobe) and UL 464 (horn)
- Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
- Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Rotary switch for horn tone and three volume selections
- Horn rated at 88+ dBA at 16 volts
- Rated from –40°F to 151°F
- Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Listed for ceiling or wall mounting
Name: System Sensor HRK-R SpectrAlert Advance Outdoor 12/24V Horn for Ceiling or Wall Installation, Red (mounting plate only – no back box included), Honeywell International, Inc, System Sensor
System Sensor SPSCWK-CLR-ALERT SpectrAlert Advance Selectable Output Speaker Strobe, Ceiling Mount, Clear Lens
SpectrAlert® Advance outdoor audible visible products are rich with features.
Features
- Weatherproof per NEMA 4X, IP56
- Rated from -40°F to 151°F
- Plug-in design reduces ground faults
Keeping You Informed
Alarmco Systems works with customers to keep them informed with new product solutions.
Process steps in our projects
Technology
Offer the best available products.
Design
System designs that are cost effective.
Development
Putting solutions in your business
Deployment
Monitoring 24/7/365
